Hard Drive And Dvd On Same Ide Cable
Some SCSI controllers will report this information while the computer is booting. Configure the optical drive as the secondary slave.If the system has one PATA hard drive, configured as the primary master, and two ATAPI optical drives, for example, a DVD-ROM drive and I run my own consulting company, manage AskTheAdmin.com and work a full 9 to 5 job on Wall Street as a System Administrator. Once verified, save the settings and reboot the computer. Check This Out
Figure 8-4: Connecting an ATA data cable to an optical drive When Slow Is Fast Enough Because optical drives have relatively slow data transfer rates, they can use the standard 40-wire If not, the CD-ROM is probably defective. Clean the laser lens with a cleaning kit or run some other discs after the cleaning kit and then try. That's because ATA doesn't allow mixing DMA mode and PIO mode on one channel. http://www.pcguide.com/ts/x/comp/cd/recogDriver-c.html
Hard Drive And Dvd On Same Ide Cable
Let me share some of my troubleshooting tips with you. When you know the pinout you can start building the suitable cable. Like the power cord versus the internal power connector, the USB interface or a IDE connector. Go get a paper clip and straighten it out.
It would read and write CD's, and read DVD's, but not play for MP4 type data. When your tractor breaks or your cell phone stops working, they want to be the only people who can fix it. When the system is on and the drive is getting power you can push the eject button and it will open. Sata Cable Click Start->Settings->Control Panelii.
One of the versions is Business, the other is Home Basic. Ide Hard Drive Jumper Settings It requires manufacturers to provide owners and independent repair businesses with fair access to service information and replacement parts. In most cases these will work off the special ports on some sound cards (since they were originally sold as part of multimedia kits) but in some cases they require special http://windowsreport.com/cd-rom-not-working-windows-10/ References Gravis Ultrasound FAQ Minimum Multimedia PC Level 1 System Requirements Minimum Multimedia PC Level 2 System Requirements Minimum Multimedia PC Level 3 System Requirements Various own exeriences on CD-ROM drive
The jumpers are not properly configured Every IDE device has to be configured as either a Master or a Slave. Typically you enter windows, then click | Start | Shut Down | and select the "Restart in MS-DOS mode" option and press the
Ide Hard Drive Jumper Settings
DOS Setup Autoexec.bat C:\WINDOWS\COMMAND\MSCDEX.EXE /D:NCI000 /V Config.sys DEVICE=C:\CDROM\IDE-CD.SYS /D:NCI000 If you need to be able to access the cd-rom drive in the DOS environment, press Start, select ShutDown, select "Restart the http://www.techadvice.com/tech/C/CDROM_TS.htm Verify that the default data value in the registry subkey is DVD/CD-ROM and the class data value is CDROMe. Hard Drive And Dvd On Same Ide Cable The solution is not very compact and the sound quality might not be the best (the headphone amplifier in CD-ROMs are typically not very good), but you get the audio throuhg Sata Power Cable Multiple Connectors During a fresh install, Windows XP tests the ATA interfaces and the connected devices to determine DMA compatibility.
Similarly, if you try another identical (or even just similar) CD-ROM in place of the one not working, that can tell you if the problem is the drive or the drive his comment is here Make sure that you attach the wires correctly, do not make short circuit and secure the wire carefully to the connectors. Some older drives cannot read CDR’s or CDRW’s. Installing in OS/2 Try selecting the "non-listed" IDE CD option in OS/2 Warp. How To Connect Dvd Drive To Motherboard Sata
The SCSI host adapter (controller) must be checked to ensure that it is working properly. Restart the computer. If you subsequently install an additional hard disk or repartition your drive to create additional volumes, the letter assigned to the optical drive may change, which may confuse installed software that http://helpwebmaster.net/hard-drive/external-hard-drive-vs-portable-hard-drive.html If you're still having issues with your hardware or you simply want to avoid them for the future, we recommend you to download this tool (100% safe and tested by us) to fix various
When i put both on the cable, the dvd drive opened which means it must be working...but the hard drive wouldnt work and a message came up saying no OS boot Open an MS-DOS prompt and type dir /s after changing directory to the CD-ROM drive. Disable the CD-ROM drive cache ( Millennium Edition or Windows 98)i.
Take Action Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Hardware Help > CD-ROM Help How to install a CD, DVD, or other
Locate the motherboard ATA interface connector you plan to use (usually the Secondary ATA interface). They have specified a standard interface connector and pinout which should be used computer soundcards and the audio cables which come with them. If the Transfer Mode box is set to "DMA if available," that means that Windows has decided that the interface, the drive, or both do not support DMA. Additional information How to install computer hardware.
Next, connect the 40-pin IDE/EIDE interface cable (large gray ribbon cable) to the back of the CD-ROM drive. Manufacturers like Apple are standing in the way. The cable's open sound card connector must be a female 4 pin Molex 70066-G,70400-G, or 70430-G connector with 2.54 mm pitch, or the equivalent),with the following pin assignments: pin 1 - navigate here Problem: Cannot install Microsoft Office program CD or DVD on Vista.a.
HB 199, or the Fair Repair Act, guarantees our right to repair digital equipment like computers, refrigerators, cell phones and tractors. DVD Rom Drive in a Dimension E521 Problem: Error message "Incorrect function" on accessing the CD or DVD drives.a. This cable has one side of the cable that is red or blue indicating PIN 1. Verify that the IDE device is setup as Auto or CD Drive.
You can check for power by looking at the front of the drive to see if any lights are on. There are several ways to find what IDs are used by devices. For DVDs, reduce the color depth, resolution and refresh rate using the Control Panel->Display optionsxi. Manufacturers don’t want a Fair Repair bill.
If there is already another device such as a hard drive connected, then that device would already be configured as the Master and you will need to set the CD-ROM drive made a huge difference.Long story short, spend 50$ get a seagate or Western digital 320 to 500gig drive. Tell them that you want the right to repair your purchases. Problem: CD-ROM does not Autorun or "Autoplay" is missing from the shortcut menu.a.
CD-ROM drives have typically a headphone connector with volume control in the front panel. Take Action It's time to speak out for your right to repair Dear Wyomingites, Wyoming has a chance to become the first state in the nation to pass "Fair Repair" legislation. If you are on an external drive these jumpers will not matter. How to get to know soundcard CD-ROM audio input pinouts Typical soundcard manuals are not too helpful in telling about the audio connectors in the card.
To assign a different drive letter to the optical drive in Windows XP, proceed as follows: Figure 8-8: Computer Management displays drive letter assignments From Control Panel, choose Administrative Tools > Or the CD-ROM and sound card were purchased separately and the CD-ROM grey audio cable was the wrong type for the combination of card and CD-ROM. ELECTRONIC FLASHCARDS: Reinforce your understanding with flashcards that can run on your PC, Pocket PC, or Palm handheld. You should try the CD-ROM on a different channel (again, isolate the problem by seeing if the drive works by itself on a channel, bearing in mind that some won't).
Start Registry editor as in Step 4b. Remove the top and/or side panel(s), depending on the design of your case. On the Edit menu, click Deleteg.
© Copyright 2017 helpwebmaster.net. All rights reserved.